ONLINE SHOP

icThermo

Engine Temperature monitor for IC helicopter engines.

The icThermo system has a lightweight (10g / 0.3oz) temperature sensor, accurate to 1C, and dual LED display unit with hi-brightness LEDs. It is pre-set for monitoring the running temperature of internal combustion model helicopter engines. A green LED is displayed while the engine is running at a safe temperature, changing to a very bright red LED if the engine is overheating. It is powered from the receiver battery with an operating current of just 30mA.

icThermo CUSTOM

A:

B:

Customised icThermo system.

A complete icThermo system customised to your own temperature requirements - perfect for monitoring batteries or motors on any model; the system weighs just 10g. Just tell us the 2 temperature points you want it to trigger at and we will provide a system to suit your application.
The Green LED will light below Temp A (0-90C),
The Red LED will light above Temp B (0-90C), accurate to 1C.

icThermo sensor assembly

Engine Temperature monitor - replacement sensor.

Replacement icThermo sensor assembly with cable and connector.

icRotoSpeed

Complete icRotoSpeed System.

Optical sensor, rotor headspeed display unit and fittings.

Order an icRotoSpeed with an icThermo and get a FREE Y lead !

Optical Sensor

Optical sensor system for use with IC RotoSpeed.

Sensor board and cable.

Digital Display

IC RotoSpeed digital display unit.

Display unit with 14.2mm red LED 2 digit display and cables.

icSwitch

icSwitch System for lights or accessories.

The icSwitch connects to a spare receiver channel to control lights or other accessories from your transmitter - great for night lighting or navigation lights.

UltraBright white LEDs

2 x 8mm LEDs for 4.8-6 volt systems.

Use the icSwitch to switch these wingtip landing lights on from your transmitter.